RESTORATION CLEANER

RESTORATION CLEANER: (RUST REMOVAL, HARD WATER DEPOS. , OXIDATOIN)

Organic*Konkrete*Metal*Granite inorganic + painted surfaces Restoration* Cleaner*Rust Remover

Surface to be cleaned must be Pre-Wet prior to cleaning. ”.General Use: 8 oz concentrate to each 5 gallon of clean water. Make sure to Pre-Wet/ scrub “Wet” with water and make sure solution is not allowed to dry until rinsing is complete

Rust removal, hard water deposit removal and oxidation. Concentrate can be used straight and 6 parts water to I part concentrate

Always protect all bordering and non-working areas from exposure and run-off.
Do not use in confined areas without adequate air flow and ventilation.
Use protective gloves, footgear and protective eye ware during dilution and use.
Dry time shall be when surface treated is perfectly dry to the eye and sure there is no moisture present in the substrate.

ALLWAYS TEST INCONSPICUOUS AREA OF SURFACE TO DETERMINE DESIRED RESULTS PRIOR TO ACTUAL APPLICATION!

THIS PRODUCT IS TO BE USED BY EXPERIENCED TRAINED HARD SURFACE CARE PROFESSIONALS ONLY!!

Onemaster Organic Restoration cleaner is a water based cleaner, restorer which has produced unequaled and stunning results removing hard water deposits, rust, salt residue, oxidation from concrete*polished*chrome*,polished*Granite*painted inorganic,*fiberglass*clear coat and polished stainless steel surfaces.

I personally have tested and used this product on all the above surfaces including grout in Porcelain installations, colored concrete interlocking tiles and various concrete and unpolished travertine and limestone.

*Caution*
All calcium carbonate based materials must be completely unpolished for Onemaster Restoration Cleaner

Awesome as a unpolished concrete restoration cleaner.

This Restoration cleaner will etch and remove polish from Polished Calcium carbonate surfaces.

Always perform a test in a test piece material or inconspicuous area to determine desired results.

Always record measured concentrate to water ratio when desired results are achieved to make sure future results are performed with previous test results.

Please note in smaller applications where large amounts of water is not applicable for rinsing use 1 cup of baking soda to 4 gallons of clean water and rinse after slurry is wet vacuumed and or squeeged in to approval disposal.

Comments are closed.